ITPT Settings
Jump to navigation
Jump to search
This page describes the ITPT settings of a KMP file.
Settings
Only for Bullet Bill !
Default 0x10 and 0x12 (combination 0,0) |
Bullet Bill under y-value: flies horizontally (can be pushed higher by barriers). Bullet Bill over y-value: flies down on y-value. |
Value | Meaning |
---|---|
0x0000 | Default |
0x0001 | Bullet Bill observed gravity and jump over barriers. |
0x0002 | Bullet Bill flies the y-value. |
0x0003 | Bullet Bill flies the y-value. |
Value | Meaning |
---|---|
0x0000 | Default |
0x0001 | Bullet Bill doesn't stop. Use it for the item points before a ramp until the first item point in the landing zone. |
0x000a | Bullet Bill under y-value: flies horizontally (can be pushed higher by barriers). Bullet Bill over y-value: it flies so low as it can and then horizontally. |
0x000b | Bullet Bill doesn't stop. Use it for the item points before a ramp until the first item point in the landing zone. |
Combinations
If looking into all 32 tracks (not _d files) of Mario Kart Wii, we can found the following setting combinations. The slot numbers should help a further analysis.
count | setting 1 | setting 2 | found in (slot numbers) |
---|---|---|---|
2370 | 0 | 0 | all but not 34 53 84 |
44 | 0 | 1 | 32 33 43 44 61 72 73 83 |
1 | 0 | 0xa | 21 |
4 | 0 | 0xb | 83 |
544 | 1 | 0 | 11 14 22 24 31 32 34 41 44 51 53 63 64 83 84 |
6 | 1 | 1 | 14 44 |
48 | 2 | 0 | 14 32 44 81 83 |
14 | 2 | 1 | 44 81 83 |
26 | 3 | 0 | 13 |
7 | 3 | 1 | 13 |