Modeling with 3D Editor
This is part of the Custom Track tutorial.
Using a 3D Modeling Program
If you have never made a 3D model before, it is recommended to use Google SketchUp 8, a free and easy to learn modeling program.
First-time SketchUp users should complete the New Users Video Tutorials before proceeding; explaining the basic terms and techniques covered by the tutorials is beyond the scope of this article. There are also other free modeling tools, see 3D Tools for more details.
SketchUp users will need to download this OBJ Exporter. The OBJ Exporter included with SketchUp Pro is not compatible.
This guide is written for SketchUp users, but most of this information applies to creating models in other programs.
Creating Your Track in SketchUp
It's important to choose a good scale for your track, preferably before you start on your model. Using Metric measurements is highly recommmended. As a rule of thumb, your roads should be between 4000 and 2000 meters across when measured in SketchUp. Please see the Scale article for more important information.
Suggestions and Guidelines
- The OBJ exporter only exports the front (white) faces of models, back (blue) faces can't be seen (or touched); this means you have to make all parts that you want to see (or touch) with white faces. If they aren't white, right-click the surfaces and click Reverse Faces.
- After you add textures you can't easily tell which is a white or blue face, so click View → Face Style → Monochrome on the main menu to view the model without textures. Click View → Face Style → Shaded with Textures to view the model with textures again.
- A surface is visible from only one side. To make it visible from all angles, you have to add depth. For example, a square is a flat, 2D surface; to make it visible from all sides, you will need to make it a cube, with a top, a bottom, and four sides. See the image to the right for a visual example of a track with rails made with and without depth.
- The whole drivable road must be above the red and green axis in SketchUp. Mario Kart Wii enforces a fall boundary below these axis even if it is not in the course.kcl file. If you were to build a road on or below these axis you will respawn (be picked up by Lakitu) over and over again.
- Lines in SketchUp will not be imported or visible in Mario Kart Wii; only faces appear.
- Boost pads can be easily made by drawing flat shapes on your track and applying a different texture to the shapes.
- There are two options for creating trick ramps: you can model it in your level or you can place an object like (the small trick ramp in Mario Circuit and Moo Moo Meadows) after importing. To make your own, draw a triangle with a back between 200 and 500m vertically, and 1000 to 2000m from the back to front. Use the pull tool to create the width. The width can be as much as the width of the entire road, or as little as 1000m. On your collision model, draw a line on the drivable surface dividing the bottom 25-35% from the top. The upper part will have a fast trick surface, the bottom will have a sticky road.
- As a rule of thumb, jumps from trick ramps across gaps should be about 5000m to allow jumping with out doing a trick in 50CC mode. This assumes that both platforms are the same height. The angle of the surface on the trick ramp will influence the distance karts travel.
- See the Model Database for a list of props like buildings, signs, and trees that can be immediately added to your level. Additionally, many other SketchUp components can be found on the 3D Warehouse, but may require rescaling and editing to work properly in your level.
Texturing and Optimizing your Model
- To texture your model you can use the File → Import menu to import your own textures or use textures from SketchUp's built-in library. Many of SketchUp's textures are in very low resolutions or have non-standard dimensions so it is recommended to import your own. SketchUp can work with non-standard texture sizes, but these textures will appear glitchy in game, so be sure that the dimensions of your textures are in powers of 2 (64*128, 16*16, 256*512, etc.) If you're interested in using some of the original textures from the game, they can be exported from an SZS using SZS Explorer.
- Textures can be positioned by right clicking any surface (Texture → Position) and using the four pins: red for moving, green for scaling and rotating, blue and yellow for distorting. Red and green pins can be used easily, while blue and yellow pins can create some problems: OBJ Exporter can't export a texture too distorted, so it will create a new texture with the distorted part of original texture. To avoid this problem, all four pins must be perpendicular and distortions can be done only in vertical and horizontal with the blue pin. However, to avoid creation of new textures, the quadrilateral in which the original texture is contained must be a parallelogram, because a not specified quadrilateral forces creation of new textures; you can ease this operation working with blue and yellow pin together, placed on vertices of the original quadrilateral, and aligning them in parallel with other two pins.
- Moiré patterns can occur when textures are under scaled, especially realistic textures. Many of SketchUp's built-in textures will exhibit this effect both in game and while modeling, which is another reason to avoid them.
- You can easily scale all instances of a texture in your level: open the Materials Browser (Windows → Materials), click on the house icon to show textures that are in use, click on a material, then click on the edit tab. The dimensions of the texture can be altered there.
- Do not use solid colors unless they are an actual image file; they will all be assigned a black texture when exported, and appear black in-game. You can check if you are using an image file or not in the edit tab of the Materials Browser. The Use texture image box will not be checked when using solid colors.
- To fix surfaces that flicker between two different textures (also known as Z fighting,) right click several adjacent surfaces and use the 'Intersect Faces' command. If one of the surfaces is part of a component, you will need to explode it (also found on the right click menu.) Some surfaces can flicker in-game when viewed from a distance, especially when viewing replay cameras, but look fine up-close. This happens when one surface is partially rendered behind another nearby surface. This can often be fixed by deleting unseen (but still rendered) faces in your model. You can right click any face and click erase. To help find these faces, you can press K in SketchUp to toggle on Back Edges view or choose Face Style → X-ray from the View menu. These unseen faces can also create collision problems, so be sure to delete them.
- You will usually need to make a separate collision model. This is just a slightly simplified version of your level; apply different textures to areas you want to have different properties (boosts, off-road, walls, out of bounds, etc.).
- The OBJ file format does not support many of SketchUp's features such as camera animation, fog, shadows, and "photo" textures. These will not show up within Mario Kart Wii as they are controlled differently in-game.
Exporting Your Model from SketchUp
After your model is done and all textures are placed you can export your model with the OBJ exporter. The OBJ exporter is found under the File menu (not the Plugins menu.) It exports the whole model and textures to an OBJ file, and converts the textures to PNG.
Importing Your Model
Open the CTools Pack's BRRES Editor and click File-->New. The click File-->Import-->Wavefront OBJ. Use the '...' button next to the file path to open the OBJ model file.
If there is a problem with the OBJ file, a message should appear explaining what is wrong. If it is to do with materials, you can disable them using the Load Materials checkbox - but you'll have to import each texture manually later on. (the texture mapping goes OK, just the actual texture goes wrong) This should not happen if you use Google SketchUp and the plugin above. If it does, please send the OBJ file to Chadderz using Mediafire or post it on the Suggestions For Chadderz thread on the Mario Kart Workshop. This is for debugging purposes as CTools is still in development. Also, be careful not to flip through textures too fast with the arrow keys as this may also cause a crash.
If everything worked, more options should come available. If you are making a course model, be sure to check the Course Model box. DO NOT import map models here as the positioning will be glitchy (Chadderz is working on it). Normally you can leave all of the other settings alone. If any face(s) do not appear in game, you will need to reverse it in SketchUp so that the white face points in the direction that you want to see it from.
If your model is too big or small, use the scale feature to increase or decrease it's size. Typically a road in Mario Kart Wii is about 15000 feet across.
If your model appears rotated, or lying on its side, use the swap Y and Z check box to correct this problem. If you use SketchUp this will not happen, but any programs that use the Z axis for vertical will require this box to be checked.
After the OBJ model is imported, save the file as/over "course_model.brres" inside the SZS. If it is named anything else it will not appear in-game.
Texture mapping gets flipped upside down by the BRRES importer in CTools. This doesn't really matter on a lot of simple tiling textures, but if your texture has printed text, complex patterns, or is vertically oriented, it will be very noticeable in-game. A good solution is to just work with your textures normally in SketchUp. When you use the OBJ exporter it generates a MTL file (which can be edited with notepad) and a folder full of PNG textures. Open all the textures you need to fix, flip them with an image editing program, and save them with a different name, add 'flipped' for example. Then open the MTL file and change the entries for all the textures you flipped to their new names, or re-import those textures into the BRRES editor after importing the OBJ. If you made a typo while editing the MTL, you'll get an error message in red when importing, just go back and check that your PNG file names match in both the folder and the MTL. (The reason for saving them flipped textures with a different name is that every time you run the OBJ exporter plugin in SketchUp, it will overwrite your changed files and you will have to flip them again every time you need to export your file.)
If your model has any transparent textures, you will need to follow a tutorial to fix a glitch that occurs. This is known as the Harry Potter effect; any surfaces behind the transparent texture will not render properly, creating an effect similar to Harry Potter's cloak of invisibility. This tutorial can be found on the BrawlBox Tricks page (requires BrawlBox v0.65 or later).
Using Other 3D Model Editors
SketchUp, while an easy to use program with many powerful features, has some limitations, particularly in how it handles textures. In particular it does not have the ability to handle advanced UV Mapping, for example, making a road texture follow the curves in the track. Some custom track authors find it useful to create their model in SketchUp and then use the advanced texturing features of other programs, such as 3DS Max.
If you made your model in a 3D model editor that isn't Google SketchUp, you have to follow some different guidelines. Just as in SketchUp you will need to export it as OBJ file. You will need to set your polygons; in 3DS Max MKWii polygons are equal to meshes. You can merge meshes using the collapse tool in 3DS Max. The exported OBJ files are mostly not compatible with the SZS Modifier, but CTools fully supports them. You will need to import these models with CTools, as it can create BRRES files of any size.
What to do Next?
It is a good idea to test the scale of your model as soon as possible, so follow the Solidity tutorial to make your track solid. You will also need edit the KMP to put the start position over the track. Refer back to this tutorial as needed as you continue to refine your model.
Introduction – Textures – Scale – Modeling ⇒ Using Blender– BRRES: CTools
BRRES: BrawlBox – Minimap – Solidity – KCL: Wiimms Tools – KMP Editing
Object Editing – Cameras – Cannons – Post-effects – Videos
Getting Files – BrawlBox Tricks – Animations – Shadows – Mipmaps
Moving Terrain – Music – Ports – Paint Remakes – Tutorial Archive
Extended presence flags: Track Tutorial – LE-CODE Track FAQ