Improperly configured camera settings can cause game crashes during opening pans, replays and post-match winning laps. Back up your KMP before you start editing.
Good cameras will make your level look much more professional, but editing them can be difficult to master.
The first two digits in the first settings box indicate the type of camera. Opening pans have the setting 05. The length of time each camera is displayed is set in z5. Their values will be 220, 257 and 294; this is to synch the camera transitions with the opening music. Normally, the first 3 cameras listed (by id) will be the three opening pans, but this can vary. There are also normally two unused cameras with setting 05 at the end of the listing; these were apparently for setting up the pans shown in the background videos on the track selection screen. These cameras can be edited, but to be safe, make sure to have all five. For Wimm's analysis go to Cameras/Reference#Opening_Pan.
The last two numbers in the first settings box control the route used. A value of FF means the camera does not use a route. You can find the Opening Route Sections so:
As example in the pic I used SNES Ghost Valley 2. Take the first CAME with the z5 as 220, here it is CAME ID 11. Take the Route Settings, here it is "0D", or only D.
And now use Hex Calculator: D+1=E
Now convert it to Decimal: E=14
Finally: The first Opening Route Section is Route Section 14.
(It also works for objects!)
Do it with the other two numbers and you have the Opening Routes for your Opening CAMEs.
- 00 = Camera immediately after finishing (the one that looks at you)
- 01 = ObjClip: Stays in one position but always points to the player. Used during replays.
- 02 = PathSearch
- 03 = KartFollow
- 04 = KartPathFollow
- 05 = Opening Pans
- 06 = OP_PathMoveAt
- 07 = MiniGame
- 08 = MissionSuccess (left over from MKDS)
See also KMP_(File_Format)#CAME
AREA with Camera Trigger 00 are the acctivators for the CAMEs after the race. If you drive in the near of one AREA after the race, it will acctivate the CAME that is written in the Settings (watch at the pic).
See also Cameras/Reference
See also KMP_(File_Format)#AREA
Camera Analysis by MrBean35000vr and Wiimm
Go here Cameras/Reference
Introduction – Textures – Scale – Modeling ⇒ Using Blender– BRRES: CTools
BRRES: BrawlBox – Minimap – Solidity – KCL: Wiimms Tools – KMP Editing
Object Editing – Cameras – Cannons – Post-effects – Videos
Getting Files – BrawlBox Tricks – Animations – Shadows – Mipmaps
Moving Terrain – Music – Ports – Paint Remakes – Tutorial Archive
Extended presence flags: Track Tutorial – LE-CODE Track FAQ