- File formats
- KMP File Format & Sections
- AREA type
- ENPT Settings
- ITPT Settings
- Item Settings - Item Boxes
- Item Settings - Objects
- KMP Editing
- KMP Editing/Cameras
- Start Position
- Check Point
- Respawn Point
- Presence flags
- Enemy routes in battle arenas
- Testing a Track
- Visual Review with »wkmpt DRAW«
Improperly configured camera settings can cause game crashes during opening pans, replays and post-match winning laps. Back up your KMP before you start editing.
Good cameras will make your level look much more professional, but editing them can be difficult to master. It's very difficult to make Cameras. Wiimms SZS Tools will make the Camera Editing easier because all values that you need are noted here.
In editing Cameras you need some knowledge about calculating in Hex. So if you have no knowledge about it, it will be more difficult to understand. Follow these steps and you will learn how to do it.
Before editing Cameras have a look at this list. You will need to learn some values for making a good Camera faster:
|Offset||Type||Description|| Box name in
| Names in
| Column name in
| Box name in|
|0x00||Byte||Camera type.|| Settings
(box 1, first 2 digits)
|0x01||Byte||Next camera entry index. Value 0xFF means: no next camera.|| Settings
(box 1, second 2 digits)
|0x02||Byte||Camshake. Exact meanings unknown (always 0).|| Settings
(box 1, third 2 digits)
|0x03||Byte||Route used by the camera. This is index link into the POTI section. The value 0xFF means "no route".|| Settings
(box 1, last 2 digits)
|0x04||UInt16||Velocity of the camera point in units per 100/60 sec (=distance/1.67 sec).|| Settings
(box 2, first 4 digits)
|0x06||UInt16||Velocity of zooming in units per 100/60 sec (=units/1.67 sec) (tested with camera type 5).|| Settings
(box 2, last 4 digits)
|0x08||UInt16||Velocity of the view point in distance per 100/60 sec (=distance/1.67 sec) (tested with camera type 5).|| Settings
(box 3, first 4 digits)
|0x0A||Byte||Start flag. Exact meanings unknown.|| Settings
(box 3, third 2 digits)
(First 2 digits)
|0x0B||Byte||Movie flag. Exact meanings unknown.|| Settings
(box 3, last 2 digits)
(Second 2 digits)
|0x0C||Float||A 3D position vector of the camera.||X, Y and Z||position (x,y,z)||X, Y and Z||PositionX, PositionY and PositionZ|
|0x18||Float||A rotation 3D vector. Almost always 0,0,0.||X2, Y2 and Z2||rotation (x,y,z)||Roll, Yaw and Pitch||RotationX, RotationY and RotationZ|
|0x24||Float||Zoom start: The angle of view (field of view). Angles >180 create curious effects.||X3||zoom beg||Zoom||Zoomstart|
|0x28||Float||Zoom end. The camera changes the zoom to this value. Offset 0x06 (Velocity) controls the speed of zooming.||Y3||zoom end||Zoom2||Zoomend.|
|0x2C||Float||Start vector of the view point (camera type 5) or the relative camera position (camera type 3).||Z3, X4 and Y4||view point beg (x,y,z)||View(x), View(y) and View(z)||ViewStartX, ViewStartY and ViewStartZ|
|0x38||Float||(Destination) vector of the view point.||Z4, X5 and Y5||view point end (x,y,z)||View2(x), View2(y) and View2(z)||ViewEndX, ViewEndY and ViewEndZ|
|0x44||Float||The time how long this Camera is active. (in units of 1/60 seconds).||Z5||sec*60||Time||Time|
Camera Editing/Step by Step guide
Cameras can be placed like any normal object. The position only matters when using certain camera settings. Cameras are found in the CAME section of the KMP Editor.
Setting a route that belongs to a camera and an object can often cause a freeze. Be sure that you only use one Routes for an object or the camera.
On VS races a sequence of cameras is shown. The exact time of the complete Opening Pan is 12,8s. It is split in to 3 sections with 3,6s, 4,3s and 4,9s (values 220, 257 and 294 found in all Nintendo Tracks).
The u8 value at offset 0x06 in the CAME section header is the index of the first camera. The next cameras are linked by the u8 value at offset 0x01. Normally 3 cameras are used, but any number can be used.
The first two digits in the first settings box indicate the type of camera. Opening pans have the setting 05. The length of time each camera is displayed is set in z5. Their values will be 220, 257 and 294; this is to sync the camera transitions with the opening music. You can change it to any other value.
If you found these 3 Cameras, we come to editing them.
The last two numbers in the first settings box control the Route used. A value of FF means the camera does not use a route. You can find the Opening Route Sections so:
As example in the pic I used SNES Ghost Valley 2. Take the first CAME with the z5 as 220, here it is CAME ID 11. Take the Route Settings, here it is "0D", or only D.
And now use Hex Calculator:
Now convert it to Decimal: E=14
Finally: The first Opening Route Section is Route Section 14.
This is the same prinzip like the Objects choose their Routes.
Do this with the other two values and you know which Routes you have to use for your Opening Pans.
After you found, which Routes are used for this cameras, go to these and drag them like you want it. One option is dragging them in the near of special objects or some buildings you made in your Custom Track for making a short review. The Camera will move along this route. It is advisable to drag the last Opening Camera Route to the Startline. Also you can change your Routes:
Search after the Route Section, where the Camera should move, as example Route Section 18.
Convert the Decimal number to Hex: 18=12
Then subtract it with 1 on Hex Calculator: 12-1=11
And now write down this number in the Route Setting Box where the Route IDs are.
For testing your Opening Pans it is good to link the last Opening Camera to the first to have an unlimited view. It sounds difficult but with one progress you made it. It's pretty simple.
This Settings are the next Camera in Hex, so. CAME 11 has the the next CAME 12 (Convert Hex to Decimal; 0C=12), The CAME 12 has next CAME 13 and CAME 13 has none(=FF). Change the FF to the Hex digit of the first CAME. Example:
The first Camera is CAME 11 so Convert the 11 to Hex: 11=0B
So I change the FF to 0B and now the Cameras are looped. You see; it's pretty simple.
This was found out by Wiimm. For his analysis go to Wiimms Opening Pan Analysis.
Now we define the points where the Cameras watch. The Start View Point shows where the Camera watch at the begin and the End View Point at the end of the Camera Intros. x3 and y3 controls the zoom, which is not used in Opening Pans, so you can ignore it.
This is how to do:
First you search an object or a place, where your camera should look. Then you take the x, y and z values and take it to the z3, x4 and y4 values (x to z3; y to x4; z to y4).
Cameras while replays and after Race
Now we come to the after-race Cameras. Here, you will need knowledge about CAME Types and AREA. It's all explained here what they are and how to use them.
First, go to AREA.
menu AREAtype 7 item Camera 0 item ObjClip 1 item EfControl 2 item FogControl 3 item PullControl 4 item EnemyFall 5 item 2DmapArea 6
Important for the after-race Cameras are AREA with Type Camera 00 which are the activators for the CAMEs after the race. If you drive in the near of one AREA after the race, it will activate the CAME that is written in the Settings (watch at the pics). The other AREA types are unimportant. Don't change it!
Drag the first AREA to a point in the near of the Stage. Do it with all other AREAs. Make sure that there are in the right order. It will be easier for CAME Editing.
The cameras after race have some different types:
- 00 = Camera immediately after finishing (the one that looks at you.)
- 01 = ObjClip: Stays in one position but always points to the player. Used during replays.
- 02 = PathSearch
- 03 = KartFollow
- 06 = OP_PathMoveAt
Camera Types 00, 01 and 03 can be used without any routes (Route IDs=FF). Camera Type 02 and 06 need Routes. All these have x3 and y3 values. If you drive while a replay or after a race in the near of one AREA it will activates the CAME, which is written in the Settings. The Type defines how the Camera is watching at the person:
- PathSearch activates the Route that is written in the Settings. The Camera follows the Route and looks at you.
- OP_PathMoveAt activates the Route like PathSearch. But it'll swing around you. It is very difficult to edit and control!
- ObjClip stays in one position and looks at you.
- KartFollow is a Camera that follows you all the time. It needs after the Settings x3 and y3 the values from z3 to x5
- Camera immediately after finishing is a Camera that follows you all the time, if you gone through the finishline, until you drove in the near of one AREA. It needs after the Settings x3 and y3 the values from z3 to x5.
Finally, you only have to drag the Cameras with type 01 and the Routes for Cameratypes 02 and 06.
- Technical information, includes a analysis.
- File, where the camera setup is hold.
- »KMP Editing/Cameras«
- A KMP and camera tutorial.
- »Wiimms SZS Tools/KMP«
- How to edit KMP files using Wiimms SZS Tools.
Introduction – Textures – Scale – Modeling ⇒ Using Blender– BRRES: CTools
BRRES: BrawlBox – Minimap – Solidity – KCL: Wiimms Tools – KMP Editing
Object Editing – Cameras – Cannons – Post-effects – Videos
Getting Files – BrawlBox Tricks – Animations – Shadows – Mipmaps
Moving Terrain – Music – Ports – Paint Remakes – Tutorial Archive
Extended presence flags: Track Tutorial – LE-CODE Track FAQ