BCP (File Format)

The BCP (Binary Camera Parameter) file controls the opening camera around the character before the countdown. There are four BCP files found in Mario Kart Wii. All of them are found into Common.szs. The files are battle_camera.bcp (used for battle), mission_camera.bcp (used for widescreen Competition/Tournament), race_camera.bcp (used for Grand Prix, VS Race, Time Trial and most Competitions/Tournaments) and start_camera.bcp (unknown). All these files found in Mario Kart Wii are 0x130 bytes long.

File Format

Offset	Type	Description
0x00	UInt32	Unknown, always 00 00 00 00.
0x04	UInt16	This value stores the ID of the first point to ignore (1-based index), which means after the previous point, it will move to the default character view. Nintendo uses 7 for all files.
0x06	UInt16	Unknown, always 00 00.
0x08	Float	Speed blend per camera position.
0x0C	Float	Scale X.
0x10	Float	Scale Y.
0x14	Float	Scale Z.
0x18	Float	Unknown.
0x1C	Float	Unknown.
0x20	Float	Unknown.
0x24	Float	Unknown.
0x28	Float	Unknown.
0x2C	Float	Unknown.
0x30	Float[3]	Start position of the camera.
0x3C	Float[3]	1st position of the camera.
0x48	Float[3]	2nd position of the camera.
0x54	Float[3]	3rd position of the camera.
0x60	Float[3]	4th position of the camera.
0x6C	Float[3]	5th position of the camera.
0x78	Float[3]	6th position of the camera.
0x84	Float[3]	7th position of the camera.
0x90	Float[3]	8th position of the camera.
0x9C	Float[3]	9th position of the camera.
0xA8	Float[3]	10th position of the camera.
0xB4	Float[3]	11th position of the camera.
0xC0	Float[3]	12th position of the camera.
0xCC	Float[3]	13th position of the camera.
0xD8	Float[3]	14th position of the camera.
0xE4	Float[3]	15th position of the camera.
0xF0	Float	Speed between start and 1st vector.
0xF4	Float	Speed between 1st vector and 2nd vector.
0xF8	Float	Speed between 2nd vector and 3rd vector.
0xFC	Float	Speed between 3rd vector and 4th vector.
0x100	Float	Speed between 4th vector and 5th vector.
0x104	Float	Speed between 5th vector and 6th vector.
0x108	Float	Speed between 6th vector and 7th vector.
0x10C	Float	Speed between 7th vector and 8th vector.
0x110	Float	Speed between 8th vector and 9th vector.
0x114	Float	Speed between 9th vector and 10th vector.
0x118	Float	Speed between 10th vector and 11th vector.
0x11C	Float	Speed between 11th vector and 12th vector.
0x120	Float	Speed between 12th vector and 13th vector.
0x124	Float	Speed between 13th vector and 14th vector.
0x128	Float	Speed between 14th vector and 15th vector.
0x12C	Float	Speed between 15th vector and end.
0x130	End of file

Tools

The following tools can handle BCP files:

• BCP Table, by Atlas.
• Wexos's Toolbox, by Wexos.