Difference between revisions of "AREA type"
(→AREA type 0x0A (Fall Boundary): That didn't make any sense) |
|||
Line 98: | Line 98: | ||
== AREA type 0x0A (Fall Boundary) == | == AREA type 0x0A (Fall Boundary) == | ||
− | Type | + | Type 10 is used by Nintendo for competitions. It creates new fall boundaries to the game without adding a new KCL file. |
[[Category:File Format/MKW]] | [[Category:File Format/MKW]] |
Revision as of 12:52, 23 October 2019
- File formats
- KMP File Format & Sections
- AREA type
- Cameras
- ENPT Settings
- ITPT Settings
- Item Settings - Item Boxes
- Item Settings - Objects
- Lists
- Tutorials
- KMP Editing
- KMP Editing/Cameras
- Start Position
- Check Point
- Respawn Point
- Cannon
- Presence flags
- Enemy routes in battle arenas
- Testing a Track
- Visual Review with »wkmpt DRAW«
- Tools
Introduction
The AREA type decides the function of the AREA element. There are 10 known types. The type is stored as a single byte at offset 0x01 in the AREA data:
Offset | Type | Description |
---|---|---|
0x00 | Byte | Area shape. 0 = box, 1 = cylinder. |
0x01 | Byte | Area type. Values 0–A. |
0x02 | Byte | Index of CAME if type = 0x00, 0xFF else. |
0x03 | Byte | Priority value. A higher number means a higher priority to choose which area activates if multiple areas are intersected. |
0x04 | Float[3] | A 3D position vector of the area. |
0x10 | Float[3] | A 3D rotation vector of the area's rotation. |
0x1C | Float[3] | A 3D scale vector of the area's scale. |
0x28 | UInt16 | AREA setting 1. Used by AREA type 2, 3, 6, 8 and 9. |
0x2A | UInt16 | AREA setting 2. Used by AREA type 6 and 3. |
0x2C | Byte | Route ID used by AREA type 3. |
0x2D | Byte | Enemy point ID. This value is used by AREA type 4. |
0x2E | UInt16 | Padding? Always 0 in Nintendo tracks. |
AREA type 0x00 (camera)
Type 0 is found in all tracks and arenas.
The related camera is enabled, when the player enters this area. This type is used for the finish camera and if waiting for the next online race.
AREA type 0x01 (EnvEffect)
With this AREA, you can define an area where EnvFire and EnvSnow is not used, and EnvKareha is used. If 0x28 is set to 1, EnvKarehaUp is used instead.
In T13, this defines the effect in the cave. In T41, this is used inside the ruins.
Type 1 is found in the tracks with ID T13, T33, T34, T41, T43 and T84.
AREA type 0x02 (BFG entry swapper)
This type of AREA controls which entry of posteffect.bfg is used.
In Bowser's Castle, both AREAs of this type use a post-effect setting of 1. While you are inside this AREA, the second entry of posteffect.bfg is used instead of the first. The fog returns to normal once you exit the AREA(s), rather than once you enter an AREA with a different setting.
It is possible that this doesn't always use the second entry, but it instead uses the post-effect setting. In this case, a setting of 0 would use the first entry, 1 would use the second, and so on.
Type 2 is found in the tracks with ID T23, T32 and T43.
AREA type 0x03 (moving road)
Type 3 causes moving road terrain in the KCL to move, and in some variants, links them to a route in the KMP which describes the path of the moving road.
Type 3 is found in the tracks with ID T32 and T52.
AREA type 0x04 (destination point)
This type of AREA is used as first destination for KCL Flag »Force Recalculation«. The position and the rotation vector are used.
Type 4 is found in the tracks with ID T22, T33, T34, T44, T63, A11 and A24. Exact these tracks use also Force Recalculation.
AREA type 0x05 (minimap control)
In the filesystem, type 5 is only used in old_mario_gc_b. It effects settings of the minimap such as culling and whether or not to appear. It is pretty much useless for normal tracks since those settings are also controlled in the BRRES, but it is also used in some competitions to crop the minimap (if the competition took place on a specific part, not the whole track), since competitions cannot deliver a new minimap.
AREA type 0x06 (music changer)
It changes the music in the tracks and add special music effects like in Mushroom Gorge's cave.
Type 6 is found in the tracks with ID T13, T32 and T34.
AREA type 0x07 (flying Boos)
Type 7 is found in the track with ID T53. This AREA type is only active, if b_teresa is defined and the file b_teresa.brres is included.
Firstly define an element in the AREA section of the KMP:
#AREA# #------------------------------------------------------------------------------------ # mode type _____position/rotation/scale______ _________settings_________ # idx came unkn. x y z #1 #2 #3 #4 #------------------------------------------------------------------------------------ 0 0 0x7 31000.000 15000.000 7000.000 0 0 0xffff 0 > -1 0 0.000 0.000 0.000 > 1.500 1.500 3.500 #------------------------------------------------------------------------------------
Secondly define a b_teresa object in the GOBJ section of the KMP:
#GOBJ# #------------------------------------------------------------------------------------ # obj-id ______position/rotation/scale______ _________settings_________ route # idx /unknw x y z #1/#5 #2/#6 #3/#7 #4/#8 /p-flag #------------------------------------------------------------------------------------ # o$b_teresa, S--------, no route, found in tracks 0 0x18c 36000.000 15000.000 18000.000 0 0 0 0 -1 > 0 0.000 0.000 0.000 0 0 0 0 0x3f > 1.000 1.000 1.000 #------------------------------------------------------------------------------------
And this is the result:
AREA type 0x08
Type 8 is found in the tracks with ID T31, T34, T41 and T43 (same tracks as type 9).
AREA type 0x09
Type 9 is found in the tracks with ID T31, T34, T41 and T43 (same tracks as type 8).
AREA type 0x0A (Fall Boundary)
Type 10 is used by Nintendo for competitions. It creates new fall boundaries to the game without adding a new KCL file.